1st Generation S-series (1983-1994) Tech Discuss 1st generation S-series (1983-1994) general tech topics here.

front brakes 91 blazer

Thread Tools
 
Search this Thread
 
  #1  
Old 12-29-2008, 12:29 PM
quik1964's Avatar
New Member
Thread Starter
Join Date: Dec 2008
Location: Keene, NH
Posts: 67
quik1964 is an unknown quantity at this point
Default front brakes 91 blazer

First of all thx for all the great help from everyone!

My 91's front brakes lock up tight when on slippery stuff (ice and snow) and my backs dont seem to to anything unless im in 4wd, im assuming the drivetrain is now doing the slowing down.
I do have a small rear axle seal leak that may be part of the rears not grabbing right, but im wondering if im missing something
Fairly new parts on all wheels except drums
 
  #2  
Old 12-29-2008, 10:52 PM
Johns1987Blazer's Avatar
Starting Member
Join Date: Dec 2008
Location:
Posts: 108
Johns1987Blazer is an unknown quantity at this point
Default RE: front brakes 91 blazer

Proportioning valve seems to be out of adjustment. But remember, the front brakes do about 70% and rear 30% of braking. May need to change brake hoses, that has been a known factor to cause fronts to lock up.
 
  #3  
Old 12-29-2008, 11:12 PM
Join Date: Dec 2008
Posts: 21
daroach1 is an unknown quantity at this point
Default RE: front brakes 91 blazer




Johns1987Blazer

titleAndStar(38,0,0,false,",")
New Member


[align=center][/align]
Posts: 38
Joined: 12/15/2008
Status: online
Proportioning valve seems to be out of adjustment. But remember, the front brakes do about 70% and rear 30% of braking. May need to change brake hoses, that has been a known factor to cause fronts to lock up.

_____________________________
Agree
 
  #4  
Old 12-30-2008, 10:33 AM
quik1964's Avatar
New Member
Thread Starter
Join Date: Dec 2008
Location: Keene, NH
Posts: 67
quik1964 is an unknown quantity at this point
Default RE: front brakes 91 blazer

Brand new hoses 2 months ago, needed to for state safety inspection.
Vehicle does have a high idle and the axle seal issue, so i have a pushing from the rears.
Is there a proportioning valve that goes 60/40?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
poertsch
2nd Generation S-series (1995-2005) Tech
7
04-23-2016 01:05 PM
goslats
2nd Generation S-series (1995-2005) Tech
15
07-31-2015 09:19 AM
mowermechanic
1st Generation S-series (1983-1994) Tech
9
01-31-2012 09:01 AM
218persuader
2nd Generation S-series (1995-2005) Tech
4
08-20-2010 06:11 PM
KarenC
2nd Generation S-series (1995-2005) Tech
5
02-12-2009 07:49 PM



Quick Reply: front brakes 91 blazer



All times are GMT -5. The time now is 07:36 PM.