85 s10 Blazer SAS project
#1
85 s10 Blazer SAS project
I have an 85 s10 blazer with a built tcase and stock motor and tranny (120k original miles). I ripped the front ifs out of it. Got a dana 30 out of a 91 jeep cherokee and used rear leaf springs out of a 94 s10 blazer n installed em up front n i made my own shackles. In the back i just did a spring over and made 4" longer shackles. Topped off both diffs with 4.56 gears (full spool in rear) and 33/11.5 x 15 Tsl's (i need 36s becuase 33s look silly with 10" of lift lol) with black steel wheels. I made a drive shaft using the front slip yoke of the jeeps driveline and welded it to 2" square tube then cut the s10 side of the front driveline and welded it to the 2 1/4" square tube (hitch and reciever) then greased em up and slid em together n used that as my custom front driveline with pleeeenty of travel cuz this thing flexs out. I will post pics when i find the cord to my camera. just wanted to share my build with you guys/gals. take care
Last edited by SldAxl85; 05-26-2010 at 12:22 AM.
#2
Yea! pics! lol
Thread
Thread Starter
Forum
Replies
Last Post