stock lug/stud length?
#1
stock lug/stud length?
[align=left]The wheels I have are just high enough offset so the fronts rub inside on the frame when cranking on the steering wheel (and they look like they're tucked in too far, IMO). I'm thinking of throwing some 1" spacers on the front and some 1.5" on the back. I see that a few folks on here have 1.25" wheel spacers, but noticed that nobody (that I could find) has used 1". Does anyone know the stock lug/stud length and if I'll have to trim my lugs if I use 1"ers? I would go with wider spacers but I'm about to lower it 3/4 and I think that might cause me to hit my fender when going over bumps.[sm=bangbang.gif]
[/align]
[/align]
#2
RE: stock lug/stud length?
i would lower it first before buying spacers and then see what kind of rubbing issues you have
#3
RE: stock lug/stud length?
I would also like to know what the stock lug thread size is on a 1994 4x4 s10 Blazer 4Dr. I am ordering Cragar 15 x 8 rims and a lug set with a thread sizeof 1/2" x 20 RH. Will these work? Thanks
Thread
Thread Starter
Forum
Replies
Last Post
mikes87k5
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
6
09-04-2010 12:41 AM
Havensk
2nd Generation S-series (1995-2005) Tech
6
07-25-2010 08:16 PM
1989blazed
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
3
03-24-2008 11:38 AM