1994 factory keyless entry
#11
Just like me. Surprise! There is an outfit called Midwest Keyless that has an e-bay store to get your remotes from. I paid under $15.00 each for mine and they (2) work like a champ. The instructions you get from them - I don't know if they work or not to program them to your vehicle. I have a factory Service Manual I used to program mine with. Let me know.
i found out the other day that my brother's '94 Jimmy came with the AX3 option. i was wondering what the remote program procedure was for it? same style of remotes that i have for my Buick, and was thinking it might be the same procedure to program his truck, but not sure.
#12
Man, sorry it took so long to get back here. Been laid up.
1) Ground pin G of Data Link Connector. (Receiver will respond by locking and unlocking doors within 2 seconds.
2) Press any button of first transmitter to be programmed.
3) The control module will respond by locking/unlocking doors and activating rear window release.
4)Press any button of second transmitter to be programmed.
5) The control module will respond by locking/unlocking doors and activating rear window release.
6) Remove ground from pin G in the DLC.
7 Verify by locking/unlocking doord and activating rear window release.
Straight from the FSM. The instructions I got with my fobs was incorrect for the year of my Blazer.
You have to be within about 30 feet of the vehicle for it to work good. The map lights in the mirroe come on when I use mine.
1) Ground pin G of Data Link Connector. (Receiver will respond by locking and unlocking doors within 2 seconds.
2) Press any button of first transmitter to be programmed.
3) The control module will respond by locking/unlocking doors and activating rear window release.
4)Press any button of second transmitter to be programmed.
5) The control module will respond by locking/unlocking doors and activating rear window release.
6) Remove ground from pin G in the DLC.
7 Verify by locking/unlocking doord and activating rear window release.
Straight from the FSM. The instructions I got with my fobs was incorrect for the year of my Blazer.
You have to be within about 30 feet of the vehicle for it to work good. The map lights in the mirroe come on when I use mine.
Last edited by Gimpy Blazer; 01-23-2011 at 07:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post
KrzyKrl25
2nd Generation S-series (1995-2005) Tech
3
01-03-2015 07:08 AM
firewalker
1st Generation S-series (1983-1994) Tech
5
03-08-2012 09:41 AM
LannyL81
2nd Generation S-series (1995-2005) Tech
2
03-06-2012 12:08 PM