Advancing timing. Clockwise or counterclockwise?
#1
Advancing timing. Clockwise or counterclockwise?
I wont have my timing light until next week. Standing in front of the vehicle Do i turn clockwise or counter to advance it? Its currently set to 0 but im going to advance it just a littlebit to help with my "performance" mods (ie: exhaust/intake done). And yes i know about unplugging the timing advance from the computer while doing so.
THANKS GUYS
91 4.3 tbi 4x4
p.s. anyone have a ac bypass pulley they want to sell?
THANKS GUYS
91 4.3 tbi 4x4
p.s. anyone have a ac bypass pulley they want to sell?
#2
If i remember right.. turn it counterclockwise. This should set it to fire a bit early, therefore advancing.
Didn't know they made a pulley to bypass the AC compressor on the 4.3. My AC sadly doesn't work on my blazer.
Didn't know they made a pulley to bypass the AC compressor on the 4.3. My AC sadly doesn't work on my blazer.
#3
You can tell by listening as you turn the distributor with the car running is it raises rpm its advancing vice versa.
#4
Whatever way the rotor turns you turn it the opposite way to advance it.
Thread
Thread Starter
Forum
Replies
Last Post
AndrewO1991
1st Generation S-series (1983-1994) Tech
4
06-04-2013 04:59 PM
Doctorvette
1st Generation S-series (1983-1994) Tech
10
11-05-2012 11:57 PM
Denominator
Engine & Transmission
0
09-23-2010 02:40 PM
hotrodln
2nd Generation S-series (1995-2005) Tech
17
04-26-2010 07:32 PM
Denominator
Engine & Transmission
10
04-25-2010 06:31 PM