ignition switch replacement
#1
ignition switch replacement
I am having trouble replacing my ignition switch on my 1993 S-10 chevy blazer 4x4. I thought it might be the reason that my ign/gau fuse keep blowing. Also there is no current in the inst/lps fues circuit. I have a thread relating to this problem but I thought that a new thread would be best. So here's the problem. When I removed the old switch in my haste I did not note the position of the actuator or linkage rod that connects to the switch. So the rod sits at a 90 dergree angle and the switch sits at a 45 dergree angle so when i try to connection the two there is tenison on the rod. So I guess I am missing something. I am not a mechanic but somewhat mechanicly incline (I think) I have came across diagrams but they are vauge in as much as showing how tho rod connects to the switch. Please help if there are pictures that would be great.
Thread
Thread Starter
Forum
Replies
Last Post
WolfPack
Article Submissions/Discussions
44
06-26-2022 10:27 PM