need parts
#1
need parts
since this website seems to have issues with letting ppl pot in the wanted section..
i have a 95 chevy s10 blazer tahoe lt 4.3 4wd
i am looking for and egr valve and an abs sensor for the front drivers side.
also looking or hood latch cable and tailgate lock/handle and a middle console lid
and for the right price i could be interested in the spare tire holder that bolts on the back and a rear window with hole for wiper motor.
i have a 95 chevy s10 blazer tahoe lt 4.3 4wd
i am looking for and egr valve and an abs sensor for the front drivers side.
also looking or hood latch cable and tailgate lock/handle and a middle console lid
and for the right price i could be interested in the spare tire holder that bolts on the back and a rear window with hole for wiper motor.
#2
do you have the cpi? I have a good egr for one.
#3
when does one replace an egr valve? when its shot? or preemptively? good luck with the parts dude. will keep my eyes peeled. where do you live?
#4
.
unfortunately i dont have cpi,
and you would usually have a check engine light and with these models, its a common fault leading to rough idle. i have both so i figure its time to start looking for one, there pretty cheap used. you can try cleaning it out and using the clean screen they sell at autozone to help prevent them goin bad.
and you would usually have a check engine light and with these models, its a common fault leading to rough idle. i have both so i figure its time to start looking for one, there pretty cheap used. you can try cleaning it out and using the clean screen they sell at autozone to help prevent them goin bad.
#5
*THREAD CLOSED*
Thread
Thread Starter
Forum
Replies
Last Post
lionel2
2nd Generation S-series (1995-2005) Tech
17
02-13-2008 05:23 PM
mrjoeyjiffy
2nd Generation S-series (1995-2005) Tech
5
08-13-2005 02:32 AM