Other 4.3 vehicles

Closed Thread Subscribe

Thread Tools

Search this Thread

#11

07-09-2010, 12:45 AM

rusty91

Beginning Member

Join Date: Jan 2008

Posts: 37

rusty91 is an unknown quantity at this point

the cpi is the same up to 95 any thing newer is not interchangeable that is a different system

#12

07-10-2010, 05:00 PM

old skool luvr

BF Guru

Join Date: Sep 2009

Location: GTA, Ontario, CANADA

Posts: 5,143

old skool luvr is a glorious beacon of light

Quote:

Originally Posted by rusty91

the only thing different about the cpi is the computer on gen 1it is obd 1 on gen 2 its obd2 on gen1 there is only 1 o2 sensor before tho cat on gen 2 there is an o2 sensor before and after the cat

ummm.............wrong.

the CPI (W-code) 4.3 is a OBDI only system (it has nothing to do with the generation of truck), as OBDII didn't come in until '96 (and a new Vortec engine design).

and it's not just the computer that is different, it's the whole top of the engine. heads are a different design, have a different intake angle compared to the Z-code (TBI) engines. meaning the mating surfaces between the cylinder heads & the intake (lower intake on the CPI/Vortec's) are different. speaking of intaqkes, the W-code had a "Tune Port" style set-up (like the Vette/Camaro/Firebird's did) and was a split design (meaning it was made up of more than one component).

also, there are a few sensors that are W-code specific, and won't work on a Z-code engine.