remove drivers side valve cover
Thread Starter
|
New Member
Joined: Mar 2025
Posts: 4
remove drivers side valve cover
cpl things 1988 blazer 2.8 efi . so i have zero compression on number 6 cylinder drivers rear. Not sure why.
first thing is im trying to get back bolt for valvet cover off. it a real tall stud and hard to get to and my 10 mm long socket is not long enough to reach the nut over the stud? any tips.
second if i where to remove engine how do you get the top bell-housing bolts loose ?
first thing is im trying to get back bolt for valvet cover off. it a real tall stud and hard to get to and my 10 mm long socket is not long enough to reach the nut over the stud? any tips.
second if i where to remove engine how do you get the top bell-housing bolts loose ?
Thread
Thread Starter
Forum
Replies
Last Post
Ash's Blazer
Engine & Transmission
1
Apr 6, 2013 10:46 AM
yarinzim
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
5
Jul 13, 2010 09:24 AM
mozkar
2nd Generation S-series (1995-2005) Tech
6
Oct 6, 2008 07:45 AM
darkshines
1st Generation S-series (1983-1994) Tech
3
Sep 25, 2008 06:53 PM