Soldering Rear Defrost
#1
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
I replaced my gas shocks on my rear window and of course when taking off the connections for the Defrost they broke off from the window.
Can I just cut 2 new wires and solder them onto the rear window and crimp on 2 new connectors and bam I'm back in business? If not what do I have to do?
Can I just cut 2 new wires and solder them onto the rear window and crimp on 2 new connectors and bam I'm back in business? If not what do I have to do?
#2
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
you can but you will have to be VERY careful. Put a wet towel on the other side of the glass. It is possible to shatter the glass if it gets too hot. Napa sells a kit to fix it. It has some conductive glue in it
Thread
Thread Starter
Forum
Replies
Last Post
ratrodsare4ever
2nd Generation S-series (1995-2005) Tech
2
04-12-2011 08:57 PM