1st Generation S-series (1983-1994) Tech Discuss 1st generation S-series (1983-1994) general tech topics here.

starting problem, possible injector

Thread Tools
 
Search this Thread
 
  #11  
Old 01-10-2009, 08:36 PM
3kidblazer's Avatar
Thread Starter
Join Date: Oct 2008
Posts: 10
3kidblazer is an unknown quantity at this point
Default RE: starting problem, possible injector

by the way i changed the injectors again on this truck and the truck fired right up and runs great now. I have a question for everyone what the he** is causing my injectors to keep going out on me??? If anyone has any ideas or suggestions i would greatly appreciate it. I can not afford $400.00 injectors every 3 months. please give ideas
 
  #12  
Old 01-10-2009, 08:43 PM
Leeann_Bravada's Avatar
Senior Member
Join Date: Aug 2008
Location:
Posts: 532
Leeann_Bravada is an unknown quantity at this point
Default RE: starting problem, possible injector

Have you looked closely at the electrical connector for the injectors? It could be damaged which eventually would damage your injectors.
 
  #13  
Old 01-10-2009, 08:46 PM
3kidblazer's Avatar
Thread Starter
Join Date: Oct 2008
Posts: 10
3kidblazer is an unknown quantity at this point
Default RE: starting problem, possible injector

i thought of that so when i pulled it apart i inspected it and it seemed to be fine but i am not a mechanic or electrician. i even traced the wire to the harness to makesure it was cut or anything but nothing all is good. thanks for that idea though.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PyroPornStar
2nd Generation S-series (1995-2005) Tech
2
05-16-2013 09:28 AM
jimi
2nd Generation S-series (1995-2005) Tech
1
07-24-2012 01:48 PM
bravada97
Engine & Transmission
0
03-13-2012 01:58 AM
87national
1st Generation S-series (1983-1994) Tech
1
06-03-2007 08:24 AM
morrocco88
1st Generation S-series (1983-1994) Tech
1
04-09-2006 03:37 AM



Quick Reply: starting problem, possible injector



All times are GMT -5. The time now is 10:05 AM.