hey for all you guys that im readin that switched from push button 4x4 to manual 4x4 what all is involved to do itr on a 93 with a 233c .. i also read thered a diy for the front posi-lock but cant seam to find it .. thanks guys

 

you can buy a kit or there was a guy that did it with like $12 worth of gear and some vice grips. search it up.

 

Here is the front posi-lock cable how-to: Homemade posi-lock cable system by mysons95

There was an article on another one of the s-series websites where someone had taken a ZR2, removed the encoder motor, cut a hole in his floor board and welded a wrench to the sector shaft on the side of the transfer case. Seemed pretty easy to do. To my knowledge, there is no bolt on kit for this though.