1st Generation S-series (1983-1994) Tech Discuss 1st generation S-series (1983-1994) general tech topics here.

won't start

Thread Tools
 
Search this Thread
 
  #1  
Old 06-25-2010 | 11:02 AM
conjoe99's Avatar
Thread Starter
|
Starting Member
Joined: Jun 2010
Posts: 1
conjoe99 is on a distinguished road
Default won't start

I have change every thing I could think of. It seems as it is not getting any spark. It turns over and I see the gas going in but it wont start. It is a 1986 s10 blazer

I thank you for any help you can send my way
 

Last edited by rriddle3; 06-25-2010 at 11:05 AM. Reason: COMBINING CONSECUTIVE POSTS
  #2  
Old 06-30-2010 | 10:47 AM
6erwebb's Avatar
New Member
Joined: Jun 2010
Posts: 4
6erwebb is on a distinguished road
Default

Check the things that control the spark first. Ignition control module comes to mind first only way to check that is take it off and take it to a parts store where they have a tool for it. Other than that right off hand I remember there was something in the bottom of the distributor that the parts guy was telling me about.

But check the module first if they get damp or old theyll go out.
 
  #3  
Old 06-30-2010 | 12:26 PM
84BlazerS10's Avatar
Super Member
Joined: Jul 2009
Posts: 1,603
From: Oklahoma
84BlazerS10 is on a distinguished road
Default

Yeah, I would check your ICM and also make sure your battery is charged and make sure your starter is working good and the wires are making good contact.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
andrewrj
2nd Generation S-series (1995-2005) Tech
11
05-06-2012 07:28 PM
princered72
2nd Generation S-series (1995-2005) Tech
7
09-13-2011 10:36 AM
Dark Rider
2nd Generation S-series (1995-2005) Tech
2
08-08-2010 11:57 PM
1BSBAKER
2nd Generation S-series (1995-2005) Tech
0
08-11-2009 10:54 AM
Irish10Hockey
2nd Generation S-series (1995-2005) Tech
6
11-13-2008 02:48 PM



Quick Reply: won't start



All times are GMT -5. The time now is 08:09 AM.