Stuck oil pressure gauge.
#1
Stuck oil pressure gauge.
After a LIM replacement, both my fuel and oil pressure gauges were off scale high. I popped the dash a couple of times and the fuel gauge started working correctly, but no such luck with the oil pressure gauge. The gauge does move but almost like it is wired up backwards.
I have no idea where the oil pressure sending unit is located, or if this was one of the many connectors that I removed during my LIM replacement.
Any thoughts.
I have no idea where the oil pressure sending unit is located, or if this was one of the many connectors that I removed during my LIM replacement.
Any thoughts.
Thread
Thread Starter
Forum
Replies
Last Post
sh1520
2nd Generation S-series (1995-2005) Tech
5
10-04-2010 01:42 PM