1995 body/chassis bushings
#1
1995 body/chassis bushings
I've searched but couldn't find anything relevant.
I'm faced with the job of replacing all the body to chassis bushings on my 1995 two door. When I dropped the gas tank to do the fuel pump, I discovered one bushing just laying in the frame.
I'm planning on replacing all the bushings with the set from the good folks at Profane.
I'm interested in hearing from you if you've done this job or have replaced any bushings.
I'd also like to know the bolt diameters, lengths and thread pitch as well as the flat washers and retainers sizes.
Any help would help.
Thanks!
I'm faced with the job of replacing all the body to chassis bushings on my 1995 two door. When I dropped the gas tank to do the fuel pump, I discovered one bushing just laying in the frame.
I'm planning on replacing all the bushings with the set from the good folks at Profane.
I'm interested in hearing from you if you've done this job or have replaced any bushings.
I'd also like to know the bolt diameters, lengths and thread pitch as well as the flat washers and retainers sizes.
Any help would help.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Diverknox
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
3
03-04-2010 10:05 PM
fjdavid
2nd Generation S-series (1995-2005) Tech
2
04-25-2007 01:33 AM
USMaverick101
1st Generation S-series (1983-1994) Tech
8
12-01-2006 12:45 AM