96 blazer
#1
04-15-2008 | 08:25 AM
Thread Starter
Joined: Apr 2008
Posts: 5
96 blazer
i have a 96 4wd when i first start out i have a bad vibration from under my truck .fluid is fine ,i hear a clunk noise when putting in reverse to any help
#2
04-15-2008 | 08:36 AM
RE: 96 blazer
The first thing I would check would be your universal joints on the rear drive shaft.
*Moving to 2nd Gen Tech*
*Moving to 2nd Gen Tech*
#3
04-15-2008 | 08:59 AM
Thread Starter
Joined: Apr 2008
Posts: 5
RE: 96 blazer
thank you i will look at those first thank you again