Hey guys,
It's my first time postin here. hope i am in the right spot. I have a 96 jimmy. I just rebuilt the motor. I forgot to put the reluctor (the gear the crank sensor reads off of) gear on the crank shaft so i have no crank position sensor working. I have to rip the timing cover off to fix. I believe this is why I have no spark. but i also have no fuel. I have fuel up to the check point on the line but not going threw the engine. Is it possible for it to be related to the anti-theft or the crank position sensor? Any help would be great. I have to drive over a hour just to work on it and no computer where the car is, so i'm trying to find out before I go back out there.
Thanks
Chris

 

Spark & fuel injection are both run based on the readings from the CKP sensor.

 

thanks very much.