Blazer won't start
#41
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
Well this is screwed up. I did everything that you suggested, replaced wires, plugs, checked it all...nothing. Replaced the cap + rotor...nothing.
Picked up a used distributor from the junkyard today, took the sensor off of it, replaced the one in mine and reassembled it. The arcing is gone. So I either did something to the rotor/cap accidentally that made it work or the sensor was screwy...
Chevy won't start but the arcing is gone, and I made sure the ignition coil is still good. Have a few more parts I have to replace with parts I know were working prior to this issue.
Maybe the arcing isn't the issue at all...just something that's been there a while.. Q_Q
Picked up a used distributor from the junkyard today, took the sensor off of it, replaced the one in mine and reassembled it. The arcing is gone. So I either did something to the rotor/cap accidentally that made it work or the sensor was screwy...
Chevy won't start but the arcing is gone, and I made sure the ignition coil is still good. Have a few more parts I have to replace with parts I know were working prior to this issue.
Maybe the arcing isn't the issue at all...just something that's been there a while.. Q_Q
#42
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
Tried plunking in a new battery to see if that made a difference. Only difference it made was causing the backfire to be worse...blew my muffler in half.
![](http://i85.photobucket.com/albums/k78/nightpath/WP_000797.jpg)
Thread
Thread Starter
Forum
Replies
Last Post
andrewrj
2nd Generation S-series (1995-2005) Tech
11
05-06-2012 07:28 PM
princered72
2nd Generation S-series (1995-2005) Tech
7
09-13-2011 10:36 AM
Dark Rider
2nd Generation S-series (1995-2005) Tech
2
08-08-2010 11:57 PM
1BSBAKER
2nd Generation S-series (1995-2005) Tech
0
08-11-2009 10:54 AM
Irish10Hockey
2nd Generation S-series (1995-2005) Tech
6
11-13-2008 02:48 PM