2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

A/C Problems

Thread Tools
 
Search this Thread
 
Old Jul 3, 2012 | 02:30 PM
  #1  
devlinmcguire's Avatar
Thread Starter
|
New Member
Joined: Jul 2012
Posts: 3
devlinmcguire is on a distinguished road
Default A/C Problems

Hey everyone,

About a month ago I was given a 95 Blazer (some nice church friends who are moving to Africa didn't need it) with 155k. The A/C has not worked since I got it. This summer is really bad so I picked up a can of freon to try and fix it. First thing I noticed as that the compressor wasn't spinning. After I added a little freon it would go on and off at about 2 second intervals. I added some more freon but could never get a good pressure reading since the compressor was constantly on and off (but it was going in between really low and really high). I then stopped adding freon when it made a loud squealing sound that scared me. Two days later I tried again but this time the compressor wouldn't turn on even after adding a little more freon. I jumped the compressor to the battery to try and get it to suck up some more freon but then, even with the compressor running, the pressure on my little refrigerant-refill-thing was at zero (but I know there is pressure in the system from poking the high and low values).

I'm stumped. Any suggestions or ideas would be valued.

Thanks.
 
Old Jul 3, 2012 | 02:49 PM
  #2  
50lb_cat's Avatar
Super Member
Joined: Mar 2012
Posts: 1,024
From: Iowa
50lb_cat will become famous soon enough
Default

It usually short cycles for awhile before staying on all of the time. How much did you put in? It may just need some more or it could be a bad pressure switch or plugged orrifice tube.
 
Old Jul 3, 2012 | 03:17 PM
  #3  
devlinmcguire's Avatar
Thread Starter
|
New Member
Joined: Jul 2012
Posts: 3
devlinmcguire is on a distinguished road
Default

It's hard to say...probably in the 5-10oz range. How do I check the switch and the orifice tube?
 
Old Jul 4, 2012 | 12:31 AM
  #4  
egbert567's Avatar
Beginning Member
Joined: Mar 2011
Posts: 38
egbert567 is on a distinguished road
Default

I'm tuned in! I'm chasing a leak....I have put dye in but I am only seeing it around the accumulator. This could be from me putting the dye in. I hate throwing parts at it!
 
Old Jul 4, 2012 | 02:00 PM
  #5  
50lb_cat's Avatar
Super Member
Joined: Mar 2012
Posts: 1,024
From: Iowa
50lb_cat will become famous soon enough
Old Jul 4, 2012 | 02:12 PM
  #6  
Rottidog's Avatar
BF Veteran
Joined: Sep 2008
Posts: 2,522
From: Winnipeg, Manitoba
Rottidog has a spectacular aura aboutRottidog has a spectacular aura about
Default

https://blazerforum.com/forum/2nd-ge...eadache-71257/
And this one, Captain Hook is very informative!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Aanenson
Engine & Transmission
8
Apr 14, 2011 09:12 PM
upblazer95
2nd Generation S-series (1995-2005) Tech
3
Apr 4, 2009 08:27 PM




All times are GMT -5. The time now is 08:27 PM.