Has anyone heard of a coolant filter?

I have a problem with slug cloggin up my heater core. Lately I have been successful in flush it out and it works for a fews day and than it clogs up again.

I would like to install some kind of in-lineonthe inlet hose to trap any debri or slug.

Thanks

 

Well you put a filter on it, wont that just clog right up just as fast, if not faster?

 

Have you tried to flush the entire system? Use a good coolant system cleaner with a flush and fill, can be found at any parts store. I would do this, and it you have done it before, do it again. Get all the crap out of there. Korey.

 

Then replace the coolant andradiator cap.

 

Flush the entire system and backflush the heater core, a filter wont work, itll clog fast, I heard 1st gens are notorious for coolant sludge. I did the flush and backflush and the heater blows hot now, before it was warmer air but maybe 70 degrees not 100+