I was installing a new distributor on my 2003 2 door Blazer LS. Misplaced the original distributor mounting bolt like a Clown and can not find what size bolt it was. I used a 10mm wrench to take it out. I Tried a few m8 (m8x1.25x25 and m8x1.0x25) bolts from autozone but they will not go in as they are just a little wider. M6 is too small width wise. I tried searching the forum so here I am asksing, before I go to a few junkyards for a bolt. Any and all help is very much appreciated.

 

See attached. Is a M8X1.25X25

 

Very nice, I sure appreciate it. I got lucky and found 2 at a Junk yard.