Hi,

I have a '99 4 Door 4 x 4 blazer that makes a loud clunking noise on the front drivers side wheel area when making a sharp right hand turn. I have had it to 2 mechanics and neither one can find anything wrong with it. They have had it out for test drives and put it up on the rack and can't seem to find what the problem is. Has anyone else run into this problem.

Thanks.

 

sounds like a cv or tripod, but i think the mechanics would have spotted that. i dont know what to tell ya. sorry.

 

I have a 98' doing the same thing, one hollow clunk under hard braking or sharp turn. When you go again or straighten out wheel it makes one more clunk or unclunks, so to say. I can't find it, have replaced some steering parts, ball joints, and a wheel bearing that were shot but can't find this noise. Did you ever figure it out? Thanks!

 

I had the same problem with my 2000 blazer, it was the front upper and lower ball joints left and right side.