What order and how many o-rings are supposed to be used for a 5/16" quick disconnect fitting? I'm trying to put a line back into a quick disconnect but it's leaking all over the place. When I pulled the line out I believe three o-rings fell out but I'm not quite sure how they go back together.

I'm using a disconnect like this.
http://shop.advanceautoparts.com/p/n...080/17191107-P

 

Well I ended up bypassing the quick disconnect all together by cutting off the nylon hose and using rubber over the barb with some RTV and a hose clamp.

 

hope you used fuel injection clamps and FI grade fuel hose

I would not have used RTV