2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

gas gauge jumping

  #1  
Old 09-19-2013, 03:26 PM
New Member
Thread Starter
Join Date: Aug 2013
Location: wilson, nc
Posts: 2
1919a6 is on a distinguished road
Default gas gauge jumping

i bought my blazer a few months ago and i haven't worried about it to much because there has been other things to work on (transmission) but my gas gauge jumps around no matter how much gas i got in it. so far i have been just filling it all the way up every time i put gas in it but i still want to get it fixed. i was just wondering what other people that have had this problem have done to fix it. btw its a 2000 model if it matters.
 
  #2  
Old 09-19-2013, 03:40 PM
newguy's Avatar
BF Veteran
Join Date: Feb 2012
Location: Easthampton, ma.
Posts: 4,205
newguy will become famous soon enoughnewguy will become famous soon enough
Default

The sender for the gas gauge is on the pump, in the tank. You could drop the tank, pull the pump and try to fix it(if you can find a new sender unit) or put in a new pump. If its a new pump, make sure its acdelco or delphi. The others are junk. Look on amazon or rock auto .com for the best price
 
  #3  
Old 09-19-2013, 04:36 PM
Captain Hook's Avatar
Moderator
Join Date: Mar 2009
Location: Belleville, Michigan
Posts: 8,448
Captain Hook has a spectacular aura aboutCaptain Hook has a spectacular aura aboutCaptain Hook has a spectacular aura about
Default

The buffer, (electronic shock absorber) in the fuel level sender is faulty. Most likely due to an aftermarket fuel pump module replacement. The level sender can be replaced separately, but requires removing the fuel tank and pump module to do it.
 
  #4  
Old 09-19-2013, 04:41 PM
sky_blazer's Avatar
Starting Member
Join Date: Aug 2013
Posts: 227
sky_blazer is on a distinguished road
Default

mine is doing the same thing but if i have to drop the tank ill just worry about it when the pump starts acting up, i too have other things that need attention first lol. it does not look like its that hard to drop tank just time consuming.
 
  #5  
Old 09-19-2013, 10:16 PM
burned's Avatar
Junior Member
Join Date: Apr 2012
Location: Vancouver, BC, Canada
Posts: 368
burned is on a distinguished road
Default

 

Last edited by burned; 09-19-2013 at 10:19 PM.
  #6  
Old 07-26-2019, 01:36 AM
New Member
Join Date: May 2019
Posts: 3
conetopia is on a distinguished road
Default

I have the 1997 SLE , and if your talking about how it kinda bounces maybe like 1/4th or 1/2 an inch... its the Ground wires, there are 6 grounds under the hood.
1 by the antenna, 2 by battery, 1 on the firewall towards left side, 1 on the right side by washer fluid box, and also 1 under the air filter box.

I had all of them cleaned, and once i found the 1 under air filter box, and cleaned it, i haven't seen the fuel gauge bounce since.
 
  #7  
Old 07-28-2019, 03:28 PM
Junior Member
Join Date: Oct 2008
Location: Pasco,WA
Posts: 325
G0LFADD1CT is an unknown quantity at this point
Default

Mine did the same thing. For a while I just filled the tank and at 260 miles of driving I'd fill up again. I eventually bought a new pump assembly on Amazon and had a buddy replace it. No more bouncing and that was 2 years ago.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
manfrednj
2nd Generation S-series (1995-2005) Tech
14
09-17-2018 02:59 PM
Bepjer28
2nd Generation S-series (1995-2005) Tech
8
08-07-2018 01:54 AM
Mike98Blazer
2nd Generation S-series (1995-2005) Tech
0
11-27-2011 07:09 PM
LeslieB
2nd Generation S-series (1995-2005) Tech
4
04-14-2010 05:21 PM
aikvenger
General Tech Help
3
05-17-2006 07:49 PM


Thread Tools
Search this Thread
Quick Reply: gas gauge jumping


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

© 2021 MH Sub I, LLC dba Internet Brands