heater controll problem
#1
Beginning Member
Thread Starter
Join Date: Nov 2008
Posts: 10

i have a 98 jimmy . for some reason my heater will not blow air on the floor setting any more . vent and defrost settings work fine but when i switch to floor it pauses for a second and just blows from the defrost . any idea where i should start looking for the problem ?
Last edited by thebigjimmy; 01-23-2010 at 01:11 PM.
#2
Beginning Member
Thread Starter
Join Date: Nov 2008
Posts: 10

never mind , found this post online http://www.s10forum.com/forum/f136/n...blazer-314010/ and figured out the door in my heat box was broken like most others . i used the coat hanger method described in the post to get the heat to blow out of both the defrost and the floor . i have no intention of taking the dash out so it will have to do ..
Thread
Thread Starter
Forum
Replies
Last Post
pmanwarren2015
2nd Generation S-series (1995-2005) Tech
4
07-08-2015 01:34 AM
anthonyd1511
2nd Generation S-series (1995-2005) Tech
2
02-07-2011 11:58 AM
illtww
2nd Generation S-series (1995-2005) Tech
2
07-23-2007 09:41 AM
Jorgen
2nd Generation S-series (1995-2005) Tech
10
11-28-2005 11:42 AM






