Heater stopped working
#11
Yep....blower motor bearings are worn and/or bearing grease is dried-out requiring extra current when cold and thus blowing the fuse.
Might be able to oil the bearings to get by until warmer temps, but requires blower motor removal to get to inside bearing....might as well replace it...but if funds are short, then could try some oil as a short-term fix.
Might be able to oil the bearings to get by until warmer temps, but requires blower motor removal to get to inside bearing....might as well replace it...but if funds are short, then could try some oil as a short-term fix.
Thread
Thread Starter
Forum
Replies
Last Post
mrartie
2nd Generation S-series (1995-2005) Tech
5
02-01-2007 01:12 PM