how do you replace the ign switch

Reply Subscribe

Thread Tools

Search this Thread

Oct 31, 2009 | 06:04 PM

GodsMechanicalCreation

Thread Starter

Joined: Oct 2009

Posts: 3

GodsMechanicalCreation is on a distinguished road

how do you replace the ign switch

I havent tried yet but it looks like it sux.

I cant see a connector, looks like its just soldered in and how does the lock cyl drive the swicth?

96 blazette

Nov 5, 2009 | 08:37 PM

swartlkk

Administrator

Joined: May 2005

Posts: 41,333

From: Waterloo, NY

Tech Article (DIY) section has a pretty good how-to by Jason (wolfpack). Nothing that a little time browsing the forum wouldn't have turned up.

Nov 6, 2009 | 08:18 AM

midnightmekanik

Starting Member

Joined: May 2009

Posts: 165

From: Ontario, Canada

midnightmekanik is on a distinguished road

Took me 20 minutes to do... This was the first time I've ever done it. I followed the guide on the site, and made sure I had the proper tools (the one female torx bit is a necessity). Not hard at all... The hardest part is to get the column cover off without breaking it or the hazard switch