2000 blazer 4WD LT 4.3

2 hoses come from the PCV valve one goes over and on top the master cylinder no problem there, the other T's off from the PCV 6 inches and stops with like a filter on the end I cant find where it hooks up to

I just did the lower intake gasket and I plugged the hose and I hear a slight hiss but cant find where this freekin line hooks up. Anyone???? please help me out.

 

Anyone?????

 

You have to wait 24 hours per forum rules to bump your thread if there are no responses.
have some patience for someone to respond. I know more about first gens than second, so I will be no help on this.

 

Ok respecting the 24 hr deal.

Should I post somewhere else on the forum?

 

You have posted in the correct section.
Maybe this will help
fixed the photo and uploaded it to the site, also, like stated, a photo would help.

 

Link seems broken.

 

Could you get a picture maybe?

 

Ok here is a pic hard to see I have a brass rod in the end to plug it.

 

This thread explains what you're looking for: https://blazerforum.com/forum/2nd-ge...nnected-82106/

 

Rich I can see the pic you posted, but I dont see the hose. The one Im looking for comes from the PCV valve 2 main lines exit one goes (top one) over the master cylinder into the fender. The one I need to know is the bottom one it comes out and splits off with a T, 6 inches or so from the PCV has a filter looking piece where it would hook to another line or nipple somewhere I just cant find it. I'll get some video.