Just lost them today
#1
Starting Member
Thread Starter
Join Date: Aug 2006
Location: North Las Vegas
Posts: 106

My driving lights indicator in the dash and now the cargo lights. They don't work when the doors are opened or when I flip the switch for the interior lights but the 4 little reading lights will work. Blown fuse somewhere?
#2
Join Date: Nov 2006
Location:
Posts: 52

Driving light indicator? Do you mean the high beam indicator? If so, the bulb might be bad for the indicator.
Does the rear cargo light come on when the hatch is opened?
Does the rear cargo light come on when the hatch is opened?
#3
Starting Member
Thread Starter
Join Date: Aug 2006
Location: North Las Vegas
Posts: 106

No it doesn't come on anymore. The rear locking/unlocking thing doesn't work anymore now. I can't unlock the doors all at once. I looked at the fuses next to the drivers door and they are all good.
#4
Join Date: Nov 2006
Location:
Posts: 52

Double check CTSY 2 fuse in the fuse box.
#5
Starting Member
Thread Starter
Join Date: Aug 2006
Location: North Las Vegas
Posts: 106

Just noticed that the horn is out. I'll be checking that fuse today. That's one of the big metal looking ones right?
#6
Join Date: Nov 2006
Location:
Posts: 52

No, I believe your talking about a circuit breaker. Its a 20 amp fuse in the #2 position in the fuse box. This fuse also powers the horns.
#7
Starting Member
Thread Starter
Join Date: Aug 2006
Location: North Las Vegas
Posts: 106

Found it and it was blown. How did I miss that one? The daytime light still doesn't work though. Oh well. At least I got everything else back. Thanks Rammer.
#8
Starting Member
Thread Starter
Join Date: Aug 2006
Location: North Las Vegas
Posts: 106

Well the problem came back. I've tried to replace the fuse like 4 times and they just pop when I stick them in. It is the CTY fuse that's a 20 amp. What can I do? This is going to suck bad.
#9
Junior Member
Join Date: Nov 2005
Location: Detroit
Posts: 482

If the fuse blows when you put it in you have a short in that circuit. Have fun finding it!
Thread
Thread Starter
Forum
Replies
Last Post
DEADBATZ
Headers, Intake, & Exhaust
8
03-02-2007 06:54 PM





