Is that for the rear eye of the leaf spring or the front. I’m not having any luck getting th rear eye bushing.

 

It fit in the rear eye. Where it connects to the shackle.

 

How are you pressing them in?

 

Did you replace the front or rear leaf spring bushing. Having a hard time finding the right rear spring bushing

Ok. Oreily’s didn’t have it in stock of course. They’ll have it tomorrow monrning. Fingers crosses

Gonna try with a huge c clamp I’ve got or a ball
Joint press. I’ll have the part Tuesday afternoon. May not get to it until late in the week

 

Yes, I replaced the rear leaf spring bushing with moog #K200897. I couldn't find a different bushing number for the zr2 package. Some WD 40 on the steel sleeve helps when installing them.

 

Thanks so much. You’re a life saver

 

Picked up the part. Greased it up and pounded it in with a big socket and hammer. Took make 20 minutes total. Thanks again for your help. Very much appreciated

 

Would happen to have the part number for the front leaf spring eye. Parts store trying to give wrong one for that as well

 

My front leaf spring bushings looked good so I didn't change them. Those came up as the Moog # SB 335. Described as "fixed point" bushing. Please let us know if that's correct.

 

no those are not correct. They are way too small