Loose tube in engine room go where ?
#1
01-31-2012, 11:06 PM
Loose tube in engine room go where ?
Can some one tell me where this tube is suppose to fit ?
https://blazerforum.com/forum/members...e-15-20787.jpg
https://blazerforum.com/forum/members...e-17-20789.jpg
https://blazerforum.com/forum/members...e-16-20788.jpg
My 4x4 dont work after i disassemble/repair/assemble right front fender and i hope this tube is to blame but cant remenber where it came from
https://blazerforum.com/forum/members...e-15-20787.jpg
https://blazerforum.com/forum/members...e-17-20789.jpg
https://blazerforum.com/forum/members...e-16-20788.jpg
My 4x4 dont work after i disassemble/repair/assemble right front fender and i hope this tube is to blame but cant remenber where it came from
#2
01-31-2012, 11:49 PM
I think that plugs into that round actuator that the hose is sitting on in the first pic. That round actuator under your battery tray that im talking about controls the engagement of your front diff so that would be why your 4WD doesnt work. if thats the hose vacuum hose that plugs into it.
Thread
Thread Starter
Forum
Replies
Last Post
racsan
2nd Generation S-series (1995-2005) Tech
1
04-24-2011 07:38 AM
ussexplorer
1st Generation S-series (1983-1994) Tech
2
04-11-2010 06:53 PM
