Mystery Connectors???
#1
Mystery Connectors???
Mysterious to me anyway! I've been under the dash to install a new ignition switch and noticed three connectors that were not connected to anything on my very basic, non-feature laden, 2002 Blazer LS 4x4. I'm hoping someone can tell me what they are used for? See photo below...
First is the blue connector running along side the OBD connector pigtail?
Second is the black 6 cavity male connector that breaks out of the large wire bundle just behind and to the left of the lower ignition switch module?
Third is the black 4 cavity female connector that is hard mounted to the receptacle and just below the lower ignition switch module?
I'm thinking these connectors must be for specific diagnostic connections or perhaps used for features not installed on my Blazer?
Can anyone help with this? BT
First is the blue connector running along side the OBD connector pigtail?
Second is the black 6 cavity male connector that breaks out of the large wire bundle just behind and to the left of the lower ignition switch module?
Third is the black 4 cavity female connector that is hard mounted to the receptacle and just below the lower ignition switch module?
I'm thinking these connectors must be for specific diagnostic connections or perhaps used for features not installed on my Blazer?
Can anyone help with this? BT
#2
Hey guys! Did I fart or something? 98 views and no replies?
With all the Blazer knowledge that spewed around here, can no one tell me what any of these unused connectors are for? Pretty tough to get any straight answers around here!
BT
With all the Blazer knowledge that spewed around here, can no one tell me what any of these unused connectors are for? Pretty tough to get any straight answers around here!
BT
Thread
Thread Starter
Forum
Replies
Last Post
99blklt4wd
2nd Generation S-series (1995-2005) Tech
1
02-03-2010 03:14 AM
pilgrim
2nd Generation S-series (1995-2005) Tech
1
01-21-2007 07:23 PM