Nylon fuel line sets
Thread Starter
|
Beginning Member
Joined: Jul 2018
Posts: 42
From: Northern Wisconsin
Nylon fuel line sets
Fuel leak in the metal lines on the frame over the tank. One line is leaking and the others look ready to leak. I really don't want to thread steel lines through there.
I found a kit online, that comes with quick-connect fittings to match, and a new fuel filter with fittings to accept the quick-connect fitting.
Has anyone used one of these?
I can't find any posts here about them.
This 97' 4wd is very rusty underneath. The brake lines rusted through last year, so I replaced those already. Now I'm going to look closer at the tank. It wasn't a terrible job to get it out, but I don't want to do it again right away.
I need this rig running. We need to go fishing.
I found a kit online, that comes with quick-connect fittings to match, and a new fuel filter with fittings to accept the quick-connect fitting.
Has anyone used one of these?
I can't find any posts here about them.
This 97' 4wd is very rusty underneath. The brake lines rusted through last year, so I replaced those already. Now I'm going to look closer at the tank. It wasn't a terrible job to get it out, but I don't want to do it again right away.
I need this rig running. We need to go fishing.
Last edited by GrandpaDan; Jul 12, 2019 at 09:46 AM. Reason: took out the ebay reference. I'm not boosting any product here.
BF Guru
Joined: Dec 2016
Posts: 5,610
From: Moscow, ID
Fuel leak in the metal lines on the frame over the tank. One line is leaking and the others look ready to leak. I really don't want to thread steel lines through there.
I found a kit online, that comes with quick-connect fittings to match, and a new fuel filter with fittings to accept the quick-connect fitting.
Has anyone used one of these?
I can't find any posts here about them.
This 97' 4wd is very rusty underneath. The brake lines rusted through last year, so I replaced those already. Now I'm going to look closer at the tank. It wasn't a terrible job to get it out, but I don't want to do it again right away.
I need this rig running. We need to go fishing.
I found a kit online, that comes with quick-connect fittings to match, and a new fuel filter with fittings to accept the quick-connect fitting.
Has anyone used one of these?
I can't find any posts here about them.
This 97' 4wd is very rusty underneath. The brake lines rusted through last year, so I replaced those already. Now I'm going to look closer at the tank. It wasn't a terrible job to get it out, but I don't want to do it again right away.
I need this rig running. We need to go fishing.
Oh, and yes, going fishing is very important!
Thread Starter
|
Beginning Member
Joined: Jul 2018
Posts: 42
From: Northern Wisconsin
Nylon fuel line kit
It's cheaper than the metal lines. #900 psi pressure rating.
https://www.inlinetube.com/products/...yABEgLPfPD_BwE
https://www.inlinetube.com/products/...yABEgLPfPD_BwE
Thread
Thread Starter
Forum
Replies
Last Post
Raybz
2nd Generation S-series (1995-2005) Tech
9
Jun 24, 2016 06:31 AM