plenum/fuel assembly
#1
04-11-2008 | 07:16 AM
Thread Starter
|
New Member
Joined: Jul 2006
Posts: 66
From: Brook Park, OH
plenum/fuel assembly
Does anyone have any suggestions as how to easily put the plenum back on the intake/ fuel assembly mine does not want to go back on without force and I do not want to damage the fuel assembly
#2
04-11-2008 | 07:56 AM
RE: plenum/fuel assembly
Use some clean engine oil on the seal to the main injector body as well as a thin film in the upper plenum sealing location, then just slide it down on.
#3
04-11-2008 | 09:28 AM
Thread Starter
|
New Member
Joined: Jul 2006
Posts: 66
From: Brook Park, OH
RE: plenum/fuel assembly
Thanks, I was hoping that would help, I had to leave for work and didn't get to try that, i tried to just put it on and was worried about damaging the parts, thanks again
Thread
Thread Starter
Forum
Replies
Last Post
hunter05
2nd Generation S-series (1995-2005) Tech
35
05-16-2024 10:01 PM
hunter05
Engine & Transmission
2
03-29-2014 12:32 PM
Klturi421
2nd Generation S-series (1995-2005) Tech
13
03-19-2013 08:19 PM
