Smart PM's to do while 4.3 is out of 4x4 Blazer with Manual Tranny?
#1
08-31-2021, 11:59 AM
Smart PM's to do while 4.3 is out of 4x4 Blazer with Manual Tranny?
Hi Guys'
Looking for preventive maintenance advice to do while engine and front diff is out to re-seal and re-clutch. So far,
diff seals,
diff Posi-Lock cable,
all engine seals and gaskets except head gaskets,
timing chain,
clutch, master and slave/bearing, and
water pump and fan clutch as I'm getting rid of Dex-cool.
CV's, wheel bearings and steering stuff all appear to have been replaced recently. Truck is a 2000 with180K.
Thanks in advance and I apologize if this is a topic that has been already beat to death but I didn't find the results I was looking for.
Looking for preventive maintenance advice to do while engine and front diff is out to re-seal and re-clutch. So far,
diff seals,
diff Posi-Lock cable,
all engine seals and gaskets except head gaskets,
timing chain,
clutch, master and slave/bearing, and
water pump and fan clutch as I'm getting rid of Dex-cool.
CV's, wheel bearings and steering stuff all appear to have been replaced recently. Truck is a 2000 with180K.
Thanks in advance and I apologize if this is a topic that has been already beat to death but I didn't find the results I was looking for.
Thread
Thread Starter
Forum
Replies
Last Post
Unlimitedsp
Headers, Intake, & Exhaust
20
06-29-2010 08:12 PM