2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

Stalling at idle

Thread Tools
 
Search this Thread
 
  #1  
Old 12-23-2014, 09:50 PM
fletch125's Avatar
New Member
Thread Starter
Join Date: Aug 2012
Location: Michigan
Posts: 80
fletch125 is an unknown quantity at this point
Default Stalling at idle

02 4.3l v6 rwd. Whenever it is cold or humid/rainy my truck starts gets to idle the RPM drop below 500 and it stumbles and dies. I can start it up and aslong as its getting throttle its fine but even driving if i let off it will start to die out. Ive checked the fuel pressure and its normal and primes fine. There are no vacuum leaks and i replaced the fuel reg vacuum lines. Im thinking its a sensor issue, possibly maf, map or tps but not sure how to isolate to tell. Anyone have any similar issues? The cap and rotor were dry and all the plugs and wires seeem to be in good condition. Thanks!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
s10blaze
1st Generation S-series (1983-1994) Tech
4
11-04-2008 05:17 PM
daffyduc
2nd Generation S-series (1995-2005) Tech
5
03-05-2008 01:33 PM
slayer6x6
Engine & Internal
13
03-12-2007 07:19 PM
Urenemy
General Tech Help
6
07-07-2006 02:40 PM
sinkerman
General Tech Help
13
03-16-2006 10:07 PM



Quick Reply: Stalling at idle



All times are GMT -5. The time now is 07:57 PM.