2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

swapping parts?

Thread Tools
 
Search this Thread
 
  #1  
Old 06-12-2010, 08:35 AM
jdveron's Avatar
New Member
Thread Starter
Join Date: Jun 2010
Posts: 2
jdveron is on a distinguished road
Default swapping parts?

I picked up a 2000 2 door Ls 4x4 about 6 mounths ago and my son wreaked the front end 2 days ago. Its pretty bad, passager front tire is pushed back into the rear wheel well and of course the whole front is smashed in. I did find a '98 zr2 today that has a good front end and would make a good doner truck if it is possable. My question is will to different years matter in tring to put this back together. Thanks
 
  #2  
Old 06-12-2010, 09:56 AM
94BlazerPA's Avatar
Junior Member
Join Date: May 2010
Location: Philadelphia, PA
Posts: 289
94BlazerPA is on a distinguished road
Default

Whats wrong with the ZR2? I would rather try and fix the ZR2 then the LS. Just my 2 cents.
 
  #3  
Old 06-12-2010, 09:28 PM
AJBert's Avatar
BF Veteran
Join Date: Oct 2007
Location: In the Colorado mountains
Posts: 2,755
AJBert is a jewel in the roughAJBert is a jewel in the roughAJBert is a jewel in the roughAJBert is a jewel in the rough
Default

The ZR2 has different mounting points for the suspension, though some of the parts will swap over.
 
  #4  
Old 06-14-2010, 06:01 AM
jdveron's Avatar
New Member
Thread Starter
Join Date: Jun 2010
Posts: 2
jdveron is on a distinguished road
Default

Thanks for the responces, the zr2 is in bad shape. not much more than sheet metal there. looks like kids ran the thing in to the dirt. Over 200k on it to. Im going to need to change out the A arms on the passanger side so I guess the zr2 won't work for me. Going to keep looking for a donor truck, hard to find a 2000, lots of 96 4 doors
 
  #5  
Old 06-14-2010, 06:18 AM
Mammys Car's Avatar
New Member
Join Date: Nov 2008
Location: Upper north east MD
Posts: 79
Mammys Car is an unknown quantity at this point
Default 2000 front end parts

I did a search the vendor's list here for suspension parts but none showed up. There used to be a vendor on fleabay that sold new control arms (with bushings and ball joints) for about $120. No removal like a donor car either. If the control arms are really bent up, it will be worth having the frame checked and straightened if needed. Good luck.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tibby
General Chat
7
12-26-2011 08:22 AM
zcat23
Steering, Suspension & Drivetrain
1
09-29-2010 10:30 AM
PHATSPEED7x
Engine & Transmission
5
06-14-2009 07:33 PM
donBlazer
1st Generation S-series (1983-1994) Tech
1
04-19-2008 12:33 AM
lionel2
2nd Generation S-series (1995-2005) Tech
17
02-13-2008 04:23 PM



Quick Reply: swapping parts?



All times are GMT -5. The time now is 09:09 AM.