2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

What weight motor oil do you run in your Vortec engine?

Thread Tools
 
Search this Thread
 
Old Feb 22, 2010 | 10:39 AM
  #31  
88s10Blazer's Avatar
Senior Member
Joined: Apr 2006
Posts: 702
From: Green Bay, WI
88s10Blazer is an unknown quantity at this point
Default

I use Mobil 1 5w-30 with a K&N Filter. I have about 42psi at warm temp while driving, and 20psi warm at idle.
 
Old Feb 4, 2018 | 06:40 PM
  #32  
tomegalla's Avatar
New Member
Joined: Aug 2016
Posts: 6
From: Ozark Al
tomegalla is on a distinguished road
Default Recomended oilfield 4.3vortex

I had a 95 s10 blazer with 224000 when I sold it and ran strong I used Mobil 1 10w30 and now have a 2001 4wd with 4.3vortex high output and use the same brand and weight
Originally Posted by Sniper 78227
i use Castrol gtx high mileage 10w 40 because i live i texas, and the temp. get up in the low hundreds. and my blazer has 199234 miles
 

Last edited by tomegalla; Feb 4, 2018 at 06:51 PM. Reason: Forgot to mention oil pressure
Old Feb 4, 2018 | 06:54 PM
  #33  
tomegalla's Avatar
New Member
Joined: Aug 2016
Posts: 6
From: Ozark Al
tomegalla is on a distinguished road
Default

Originally Posted by ComputerNerdBD
I always make the oil change place put 10W-30 oil no matter where I go. I also have it changed every 2500-3000 miles. In fact, if I am home for the weekend from college and it is close to 2500 miles since the last oil change, I get it changed anyway.
It would go to 60 PSI on startup, 45-50 during cruise at 65 MPH and down to 30-40 (sometimes 25) on idle at operating temp. At the last oil change 700 miles ago, I had them put Lucas Oil stabilizer in it. I noticed my cruise and idle oil pressures go up by 10 PSI. They also said there was alot of moisture on the pan and that the oil pan gasket must be leaking. I parked it on my mom's new garage floor and she was pissed when I pulled it out and my front tires lifted the paint and there were 2 drops of oil on the fresh paint!!!

With 5W-30, it would go down to 20 on idle when it is hot, so I always tell them to put in 10W-30 and if they put up an arguement (like when I had the coolant flushed they argued with me about putting the green stuff in. They put Dexcool in anyway. Never went back there.) I tell them to move the car out of the bay and that I am leaving.
you did the best thing for your Turks sake
 
Old Feb 8, 2018 | 08:26 AM
  #34  
jimspahr@msn.com's Avatar
Super Member
Joined: Apr 2013
Posts: 1,029
From: South Carolina midlands
jimspahr@msn.com is on a distinguished road
Default

I use 10W/30 Pennzoil Platinum Ultra with a NAPA Gold filter. OCI of 5K.
 
Old Feb 9, 2018 | 04:44 AM
  #35  
GreenBlazer2002's Avatar
Senior Member
Joined: Oct 2016
Posts: 605
From: Thomson, Ga.
GreenBlazer2002 is on a distinguished road
Default

I use 5w30 synthetic blend, whichever brand is on sale, and Wix filters (the bigger one for 4x4).
 
Old Feb 9, 2018 | 08:27 AM
  #36  
tomegalla's Avatar
New Member
Joined: Aug 2016
Posts: 6
From: Ozark Al
tomegalla is on a distinguished road
Default

I just rebuilt my motor a 4.3 offed high output roller and but 5w30 and oil pressure goes to 20 at idle when hot
 
Old Feb 9, 2018 | 07:56 PM
  #37  
christine_208's Avatar
BF Guru
Joined: Dec 2016
Posts: 5,588
From: Moscow, ID
christine_208 has a spectacular aura aboutchristine_208 has a spectacular aura about
Default

Mobil 1, 5W-30 High Mileage synthetic (135k miles on motor)
Wix filter
47 psi when cold (43'F) at idle
27 psi when hot (189'F) at idle
 

Last edited by christine_208; Feb 10, 2018 at 11:12 AM.
Old Feb 9, 2018 | 08:57 PM
  #38  
RQuickDraw's Avatar
Beginning Member
Joined: Oct 2006
Posts: 42
From: New Jersey
RQuickDraw is on a distinguished road
Default

+1 for the Mobil 1 5w30 HM on my 2000 Jimmy (106K).
 
Old Feb 10, 2018 | 10:37 AM
  #39  
chevyriders's Avatar
Moderator
Joined: Apr 2013
Posts: 878
From: NY
chevyriders is on a distinguished road
Default

NAPA/ valvoline 5w30 conventional oil
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chris015
General Chat
15
Jun 8, 2012 12:37 PM
JeremyG
Engine & Transmission
3
Nov 14, 2010 01:15 PM
bigdaddykane93
General Chat
20
Sep 22, 2009 08:42 AM
ExplicitYourSelf
General Chat
7
Aug 5, 2009 02:12 PM
ChevyRacing88
Audio/Video Electronics
17
Mar 16, 2008 01:23 AM




All times are GMT -5. The time now is 02:56 AM.