Neither, they're sitting in the rear of the truck lol. I had to go out of town Monday, and just got back in town a couple hours ago. Upon my return however, I noticed a 2" PA Body Lift at the door. *sigh* The instructions for this seem very lenghy. As for the shackles, I'm not sure what to do yet, very irritating lol...

-OSS

 

hopefully mine come out like a breeze with an air chisel . or i can use my 10 ton puller somehow

 

Good way to get the bushings out, drill with about a 1/4 inch to a little less than 3/8 bit thru the rubber and use a 2 jaw puller to push the bolts and there sleeves thru, then push the rubber out with a screw driver and cut the outer sleeve with whatever tool you would like (sawzall) and hammer them out with a screw driver. IMO best way without a torch of any sort (good for driver side 2nd gens)