alpine mrp-m350 enough for...
Is it enough power to run an alpine type r 12?
or 2 12" type s' |
RE: alpine mrp-m350 enough for...
barely. just remember to not crank the gains to compensate for low power.
|
RE: alpine mrp-m350 enough for...
what would be a good solid amp to power the alpine type r or two alpine type s'
giving them enough power |
RE: alpine mrp-m350 enough for...
zx750.1 would work with either one type R 12 or two Type S
|
RE: alpine mrp-m350 enough for...
A person from crutchfield tol me that the alpine mrp-m450 would be great to run a type r so i think thats what im going to with
|
RE: alpine mrp-m350 enough for...
pdx 1.1000
|
RE: alpine mrp-m350 enough for...
well now thats 450rms to a 500 rms sub.
does 50 watts make a big difference? probably not. but that type r can handle way more than that. I would take the single R over 2 type s 12's. I would go with what hillbilly recommended and try to find a zx 750.1. Probably cheaper and more power. |
RE: alpine mrp-m350 enough for...
yes, under-powering a speaker is usually just as bad as over-powering it. People will turn the gain and bass boost up more to get it louder, leading to speaker failure.
|
RE: alpine mrp-m350 enough for...
my zx750.1 was $180 USD shipped. idk about that alpine
|
RE: alpine mrp-m350 enough for...
I thought over powering a sub is fine as long as distortion is left outta the picture.
distortion kills subs, not too little, or too much power. |
All times are GMT -5. The time now is 08:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands