1997 4 door LT Build
Im gonna start with a few things for my blazer, i have alot of picture under my garage if you want to go see but as of right now all i have done is put a kenwood head unit in, plastidip the bowtie, remove the valence, and bed line the back behind the seats.
Future plans: HID Headlights, Off road/ Daylighters mounted to the roof racks, new bumper, bedline rockers, skid plates, and i have a 2in PA body lift i just need to put it on
Let me know what you guys think and any other ideas! Thanks
Future plans: HID Headlights, Off road/ Daylighters mounted to the roof racks, new bumper, bedline rockers, skid plates, and i have a 2in PA body lift i just need to put it on
Let me know what you guys think and any other ideas! Thanks
Last edited by jbw23; Mar 17, 2012 at 11:47 AM.
do you plan on adding a roof basket or just mounting the lights to the cross bars on the factory rack.
also instead of kcs you can get a set of these for way less
6" Off-Road Light System
they are amazing, and for ten bucks a piece.
also instead of kcs you can get a set of these for way less
6" Off-Road Light System
they are amazing, and for ten bucks a piece.
ah ok. well an easy way to run wire up there that looks better than having it come up through the doors ir running it through the headliner, all the way back to the rear hatch, pulling the seal off on one of the corners and up onto the roof.
Thread
Thread Starter
Forum
Replies
Last Post
yardbird
2nd Generation S-series (1995-2005) Tech
3
Jun 14, 2019 05:54 PM
hlaverty06
Paint, Body, & Interior
0
Mar 23, 2014 09:25 AM
Confuused69
Builds
8
Mar 17, 2010 08:14 PM





