almost been 2 years!
Starting Member
Joined: Jan 2010
Posts: 164
From: temp NYer..love PA!
the back gate rattle was eliminated mostly by taking the back plastic off and using pillow stuffing (polyfill) and then putting the plastic back on where it was a "snug" fit. I also did the same with the vents (took the eraser end of a pencil and jammed the polyfill into the vent)
i also noticed the rear wiper wiggled like mad so at each knuckle of the wiper blade itself i taped around a few times with black electrical tape, for the most part it eliminated all the rattle.. however the back window squeaks over bumps and whatnot, im still hunting a way to fix that (the nipple on the latch rubs against the metal which makes it squeak)
i also noticed the rear wiper wiggled like mad so at each knuckle of the wiper blade itself i taped around a few times with black electrical tape, for the most part it eliminated all the rattle.. however the back window squeaks over bumps and whatnot, im still hunting a way to fix that (the nipple on the latch rubs against the metal which makes it squeak)
BF Guru
Joined: Sep 2009
Posts: 5,143
From: GTA, Ontario, CANADA
The oldsmobile "jet" emblem on the nose is still there, I havent been brave enough to pull it off and coat what is silver to black... i can do it with ford emblems but i havent had the real urge to pull mine yet.... not only is it a good eye catcher, but i dont wanna mess it up..yet
i'd leave the emblem up front alone, it is a godd eye catcher.
"jet" emblem? i thought the Olds emblem was of a rocket (like rocket ship), named for their line of "Rocket" engines back in the day (like the "Rocket 88")?
Thread
Thread Starter
Forum
Replies
Last Post
cj_feltner
Engine & Transmission
4
Sep 20, 2007 05:30 PM
Bojib
2nd Generation S-series (1995-2005) Tech
2
Jun 21, 2007 12:28 PM
