Mmmrodge's 2000 Jimmy
They're going to rub pretty bad I think, and the plastic trim on the Jimmy's is only going to make it worse too.
Good luck with it.
Thread Starter
|
New Member
Joined: Jul 2010
Posts: 84
well it wouldnt let me edit my other posts so here are my updates:
PA body lift installed
started at the rear first for the rough country lift
test fit
cutting bumper safety first
front progress
diff bracket
front done
cutting front fenders for 33's
test fit front
pile of crap that fell on the floor during build
test drive
PA body lift installed
started at the rear first for the rough country lift
test fit
cutting bumper safety first
front progress
diff bracket
front done
cutting front fenders for 33's
test fit front
pile of crap that fell on the floor during build
test drive
Thread Starter
|
New Member
Joined: Jul 2010
Posts: 84
not too much rubbing on the street - over curbs ect. off road might be different. i expected it to be worse with the 33X12.5. i hacked the rear of the front fender to be flush with the firewall. i need to rivet the fenderwell to the firewall and bend it under more. rubs the frame at full lock. and cut the rear bumper end caps to make a straight cut down.
Thread Starter
|
New Member
Joined: Jul 2010
Posts: 84
small update. plasti dipped my z28 wheels. front aluminum skid plate installed. i have the other 2 but I need the brackets for lower control arms. also did some rustoleum touch up on the frame and drivetrain. wow my garage looks really messy haha
Last edited by mmmrodge; Oct 29, 2012 at 06:41 AM.
