Project:BlaknBlu
#1
Project:BlaknBlu
Well, I realized that I haven't done a build thread yet. SO! I will go ahead and post the mods I have done so far. Here we go!!!
This is what she looked like 3 days before I bought her.
First thing was get rid of the deflector. It's on my mom's Bravado now.
I DIY'ed a custom grille, but after a week, I didn't like it, so I ditched it.
Tinted the tailights
They look sinister, lol.
Clear signals
Blacked the bowtie
LED dome
removed the crossbars, but had to put them on Friday to carry a Banana
Debadged the tail gate.
I also have a Pioneer deck installed. Looking for a pic...
I know this isn't the most exciting build, but not having a job kinda puts a damper on your progress. It'll get exciting when I get another job!
As she is now.
Finished de-badging 2-28-10
Future plans!!!
*DONE* New radiator and hub assembly.
New Spider injector(switching to multi-port)
3 inch drop
20 inch Boss 327 rims
Xtreme body kit
repainting Blue, with Black Hood stripes, Blue center bar, rear winow trim, door handles
Street scene mirrors in Blue
Hood with cowl
Finish sound system with Pioneer Components up front, Pioneer 6x9s rear, 12" Rockford Punch sub, Alpine amps for sub and speakers
Leather seats
New taillights with a better tint, and LED bulbs. Or maybe custom building a set to go behind the lens.
Clear Headlights with HID low beams
Smoked Headlight covers so I can take them off for night, stick them on for the shows.
*DONE!*Finish de-badging
Finish de-striping
Shave roof rack
Cold Air intake
performance programmer
Bigger brake swap from either a Trans Am, or Impala SS. Not sure.
Lock rite Locking rear diff.
Edelbrock SDT muffler, and new exhaust that exits out of dual Vette tips like mdehoogh's.
This is what she looked like 3 days before I bought her.
First thing was get rid of the deflector. It's on my mom's Bravado now.
I DIY'ed a custom grille, but after a week, I didn't like it, so I ditched it.
Tinted the tailights
They look sinister, lol.
Clear signals
Blacked the bowtie
LED dome
removed the crossbars, but had to put them on Friday to carry a Banana
Debadged the tail gate.
I also have a Pioneer deck installed. Looking for a pic...
I know this isn't the most exciting build, but not having a job kinda puts a damper on your progress. It'll get exciting when I get another job!
As she is now.
Finished de-badging 2-28-10
Future plans!!!
*DONE* New radiator and hub assembly.
New Spider injector(switching to multi-port)
3 inch drop
20 inch Boss 327 rims
Xtreme body kit
repainting Blue, with Black Hood stripes, Blue center bar, rear winow trim, door handles
Street scene mirrors in Blue
Hood with cowl
Finish sound system with Pioneer Components up front, Pioneer 6x9s rear, 12" Rockford Punch sub, Alpine amps for sub and speakers
Leather seats
New taillights with a better tint, and LED bulbs. Or maybe custom building a set to go behind the lens.
Clear Headlights with HID low beams
Smoked Headlight covers so I can take them off for night, stick them on for the shows.
*DONE!*Finish de-badging
Finish de-striping
Shave roof rack
Cold Air intake
performance programmer
Bigger brake swap from either a Trans Am, or Impala SS. Not sure.
Lock rite Locking rear diff.
Edelbrock SDT muffler, and new exhaust that exits out of dual Vette tips like mdehoogh's.
Last edited by cbr995; 05-27-2010 at 07:29 AM.
#2
im diggin the clean look so far gotta get the small details done before the big ones first. And i totally gotta get me one of those black bowties they just look sick.
#3
Thanks!
And the Black bowtie cost me four bucks!
Buy a can of Krylon Fusion (it's made for plastics, and requires NO sanding, so you get a glossy ginish) and lay down two coats on that bad boy!
And the Black bowtie cost me four bucks!
Buy a can of Krylon Fusion (it's made for plastics, and requires NO sanding, so you get a glossy ginish) and lay down two coats on that bad boy!
#4
Good build so far man. Simple and clean, with good future plans. If you ever need help on any of those mods lemme know.
#5
Haha I don't want to put you through an hour drive just to help me. But if I really need it, I'll buzz ya.
#6
Okay, I now have a better pic of my debadged tail gate. I couldn't do the doors because it's been raining all day. But those will be removed tomorrow or Friday.
#7
Very nice Matt.. Kinda suprised you haven't had a build thread up until now tho. Anyway I like your truck, always have. It's always so clean!! But I guess it helps you live in Florida lol.
My suggestion: ditch the pinstripe
My suggestion: ditch the pinstripe
#8
As for the pinstripe, that's slowly going away. If you notice in the last pic, it's receded a bit.
#9
Can we just swap out the disc brakes that easy?
Last edited by wlorton; 02-24-2010 at 05:31 PM.
#10
dunno. But I have seen them done before on Dimes and Blazers.