you mean the ceramic / porcelin stuff ? not metal :P

those will look good with FX-R Projectors in there

 

No, it's painted metal. I have a set from them with a different lens and the back is metal with paint.

 

oh that's wierd :P the ones i had for my '90 Blazer and '91 RX-7 we're ceramic style lamps :P

 

Yeah, the stock h4666's I have are made out of glass or ceramic or something like that. But I'm getting these for the lack of plastic.

 

Well I got my clear lens headlights today.


Here is the old lenses.


Old lenses turned off.


New lens on drivers side, old on pass.


Both new.

 

Its amazing how something small can make such a diff
looks good

 

Thogert, if you are still wondering what happened to your soldering iron tip, the outer iron layer got scratched or nicked and the copper core started to oxidize and disintegrate. My job involves soldering almost everyday, so that is how I know. Also, when you are done soldering, put a blob of solder on the tip and let it cool... this will help protect and preserve it.

P.S. Your lights are looking good!

 

Thanks man, that's good to know.

 

I got a couple of pics of my led board for the tail light project. There is the 4 1 watt leds in the middle but they are not working (one led is bad) so here are the rest.

Parking light.



Brake / turn signal light.


P.S.
I really hate the beam pattern from the new headlights. They are all splochy and they have dead spots. They are worse than the hid kit I used to have in the old housings.

I can't wait for some FX-R's.

 

those look sick !