|
White knight!
This is my 2003 chevy blazer with almost 79k on it
This is what ive done so far.. *Led low and high beams *led interior lights *led reverse lights *2.5 catback with flowmaster 10 *k&n drop-in *78 group battery upgrade * 120 amp rewounded stock alt( soon to be ad244) *big 3 upgrade *factory ground( slowly being upgraded) *pioneer deh-6010bs *hayden 677 trans cooler, in front off stock cooler |
https://cimg3.ibsrv.net/gimg/blazerf...9fe5ce471e.jpg
Changed 4wd actuator https://cimg6.ibsrv.net/gimg/blazerf...d48acadd2c.jpg Tight fit https://cimg7.ibsrv.net/gimg/blazerf...01575a1a4e.jpg https://cimg8.ibsrv.net/gimg/blazerf...76ab3d52a6.jpg 75 to 78 agm https://cimg0.ibsrv.net/gimg/blazerf...d43ed61529.jpg https://cimg3.ibsrv.net/gimg/blazerf...4531946b52.jpg First day i got it |
|
|
|
NIce!
|
1 Attachment(s)
Flowmaster 10..dual tip
https://youtu.be/4LjM_6GC_NI |
Did the headlight relay and a small 16 gauge relay on turn signals. The output on headlights would go as low as 9.89v with car running, now.i domt see them drop lower than 14.2v. I will work on re-aiming them on labor day.
https://cimg8.ibsrv.net/gimg/blazerf...e17ee4a2a1.jpg Big difference https://cimg9.ibsrv.net/gimg/blazerf...bebd532ce1.jpg |
https://cimg3.ibsrv.net/gimg/blazerf...fd242c4a20.jpg
https://cimg5.ibsrv.net/gimg/blazerf...9eb7e645b5.jpg https://cimg8.ibsrv.net/gimg/blazerf...d319486597.jpg New recovery rope It's been awhile for since an update. I finally put on the a draw tite hitch and wired up. Looks great. Also got the recommended hitch shackle, had a chance to use it, worked fine. Also bought another recovery rope as well |
An update on white kinght!. I have gotten 2 new cv axles and a full tune up. Im really enjoying the ac delco 41-993 iridium's. Finally installed some auxiliary lights on the front. Used a modified license plate bracket. I also added some extra backup lights. I wired some rock lights onto backup wire for trailer harness, since they use a low amount of power.
https://cimg4.ibsrv.net/gimg/blazerf...e98ae7d344.jpg https://cimg5.ibsrv.net/gimg/blazerf...a22c5887c1.jpg https://cimg6.ibsrv.net/gimg/blazerf...1cf0a8136c.jpg |
Looks good!
|
Thank you...amazon works miracles. Thinking about adding some rock lights to upper panels above rear lights. And maybe some amber lights in grille
|
I've got lots of electrical.upgrades and add ons coming soon. Cant wait to show yall!!
https://cimg1.ibsrv.net/gimg/blazerf...cc97cf8106.jpg https://cimg3.ibsrv.net/gimg/blazerf...d936a2dca7.jpg https://cimg2.ibsrv.net/gimg/blazerf...f9362610b1.jpg Mocking in up.a bracket so these can go.in rear jack location https://cimg4.ibsrv.net/gimg/blazerf...3d13f57a2b.jpg Can never have enough usb ports |
https://cimg2.ibsrv.net/gimg/blazerf...fbb83dcc32.jpg
This will be in the astray location, it also has a voltmeter https://cimg5.ibsrv.net/gimg/blazerf...706c7c3049.jpg New light switches for aux lights/ fog lights https://cimg4.ibsrv.net/gimg/blazerf...73e699cf7a.jpg Fuse panel for new stuff, will be in center console, and will be fed with 6 awg. All usb/cig lighter clusters will be fed with 14awg, opposed to factory 22awg. Future cb radio will use 12 gauge https://cimg3.ibsrv.net/gimg/blazerf...74cc14725e.jpg This will be in the back of center console for rear seats |
A little rewiring
|
I like the idea of an electrical panel on the rear face of the console!
|
Christine I figured this will give me the ability to add stuff in the future. The rear usb will be nice when I have long trips. I. An keep tablet charged for my little boy. Will also add an small 300w inverter up front and a bigger 2000w in cargo area
|
I'm dreading getting wire through firewall. I'm bringing 2 switch sets and 6 awg through
|
|
|
I love the roof rack, perfect fit! The tail lights are nice too... pointless for me to get the aftermarket ones with my light covers...
|
Thank you donL, hopefully the headlights and fog lights will be next.
|
|
Looking good!
|
Thank you !!
|
|
Nice! Looks good, I like the blue
|
Thanks DonL ....it was slightly frustrating but now I have the ability to add more stuff in the future
https://cimg2.ibsrv.net/gimg/blazerf...b14db841b7.jpg |
|
Nice! Been thinking of doing the same on the rear of my center console... what did you tap it into?
|
https://cimg7.ibsrv.net/gimg/blazerf...3c41b0661a.jpg
The double 10 awg is the feed. https://cimg1.ibsrv.net/gimg/blazerf...1d9401f9a4.jpg Two 10awg i ran straight to the battery. Then i ran a 14awg to the fuse panel for an ignition signal. Then ran it back for a relay underneat center console panel, so i can add things in the future, if they need a ign power. I have 2 spots left on actual fuse panel. |
Got some new headlights...much better also came with reflector inside low beams.
https://cimg8.ibsrv.net/gimg/blazerf...18db99a396.jpg https://cimg3.ibsrv.net/gimg/blazerf...76f6a98267.jpg |
Much cleaner
|
Thank.you don!! I wish I could find some euro style parking lights with the fogs
|
Finally got some better tires!! Upgraded to 30x9.5 15
https://cimg6.ibsrv.net/gimg/blazerf...304fd36f79.jpg https://cimg4.ibsrv.net/gimg/blazerf...8f63483a46.jpg https://cimg1.ibsrv.net/gimg/blazerf...a2f9074458.jpg https://cimg4.ibsrv.net/gimg/blazerf...fc7045aaaf.jpg |
Nice! What brand?
|
A smaller brand call road one..they are made by piralleli. They are usually know from their calvary mt, but this one is a newer model. They are budget friendly only cost me 800 for 5..including the road hazard
|
Originally Posted by 03jawja
(Post 719676)
A smaller brand call road one..they are made by piralleli. They are usually know from their calvary mt, but this one is a newer model. They are budget friendly only cost me 800 for 5..including the road hazard
|
I believe it is a good compromise! I love the look. I'll probably only lift and 1.5 -2 in max. Working on ordering steering stabilizer now to help
|
| All times are GMT -5. The time now is 06:34 PM. |
© 2021 MH Sub I, LLC dba Internet Brands