4.3 problem

Closed Thread Subscribe

Thread Tools

Search this Thread

Apr 19, 2009 | 10:41 AM

coniston34

Thread Starter

Joined: Dec 2008

Posts: 2

coniston34 is an unknown quantity at this point

4.3 problem

have a problem with my engine. just finished changing the cap, rotor, plug wires and installed a throttle body spacer and now the truck starts up and dies bout 30 sec later. can anyone give me some advice?

Apr 19, 2009 | 12:04 PM

rriddle3

BF Guru

Joined: Dec 2006

Posts: 6,594

From: Fort Worth,Texas

Please spend a little time reading the many, many threads concerning problems similar to yours. There are so many variables and you really didn't give us much to go on.

Apr 19, 2009 | 12:05 PM

coniston34

Thread Starter

Joined: Dec 2008

Posts: 2

ok thanks i'll check back on some threads and if there are any other concerns, i'll check back

Apr 27, 2009 | 08:28 PM

SonomaBlazer

Beginning Member

Joined: Apr 2009

Posts: 13

Just to be on the safe side pull your cap back off and make sure it has no cracks in it. Look at the cap real good, make sure there are no small cracks.