hey i hate to say it but when your right you are right can i get away with just mapp gas alone because that is about the only thing i have access to that would be in my buget like one of the portable torches from lowes i think just the bottles are about $10 not the little cig lighter torch

 

Just get a regular propane torch head and use that on your map gas.It will take about 10 minutes or so to get them red hot.

 

Ok thanks for your input will start on that tomorrow and thanks for all your help and advice thrhoghout this

 

Not a problem thats why were here just doing my part.

 

I know we are all human even me I could kick myself it turned out my manifolds were threaded so I took them off and sent them 2 a buddy that is drilling them out for mei got the tranny stabbed in today then wenta cut grass at my other biddys house came back and put the shift cable &bracket on hope I can hear it run before this weekend is over keep

 

So Im kinda lost are you sayin that the bolts in the manifold are broke and not the ones that connect the ypipe to the cat?Cause yeah the manifold bolts are threaded but Ypipe bolts are pressed in at least on my 96 they were.I replaced them with threaded.

 

From manifold to y pipe where doughnut gaskets go are threaded y pipe 2 cat are pressed

 

Any updates on your transmission rebuild? I am about to embark on this journey. We have no reverse backing out of the garage so there it sat for over a year now. This was suppose to be an uncle-nephew project but has turned out to be a true “do it yourself” rebuild. Read many web posts and viewed many YouTube videos on this 4l60e. Looks like I have a sun shell problem. I can rig a spring compressor with what tools I have. My only worry is those Teflon seals and how to install/resize them without that special tool. How did you handle them seals?