92 s10 blazer. No codes won't down shift.
No vacuum modulation on 700R4. Uses throttle valve to control pressure through cable. I would look into the backfire issue you are experiencing. There also is a downshift valve that may be sticking or spring broken.
Last edited by Transman304; Jun 5, 2018 at 07:25 AM.
Thread Starter
|
New Member
Joined: Jun 2018
Posts: 9
From: Alvin, Texas
not that I can find.. I hooked up all my vacuum lines when I replaced the distributor. It fixed my 4x4 and a.c. and my cruise control but not this issue. I've got to be missing something
Thread Starter
|
New Member
Joined: Jun 2018
Posts: 9
From: Alvin, Texas
thank you both. Im just home from work and getting on it now. Fingers crossed
Thread
Thread Starter
Forum
Replies
Last Post