'95 CPI Spider Injection Expierence? Anybody?
Thread Starter
|
Starting Member
Joined: Mar 2017
Posts: 220
From: Tulsa, OK
'95 CPI Spider Injection Expierence? Anybody?
I have my "faulty" spider and I have a spider I pulled from a salvage. I'm pretty sure my spider is plugged up, so I took it apart. I switched the poppets and injector lines. I opened the top of both spiders and did a comparison on the 2. Mine is on the left, and the one I pulled is on the right... Mine looks dirty and clogged and the salvaged one looks alot cleaner! Should I use the salvaged center piece instead of my original ?? ...
Thread Starter
|
Starting Member
Joined: Mar 2017
Posts: 220
From: Tulsa, OK
My uncle says my injector wasn't firing, but from what? Is that dirty fuel or oil?... Any who, I have the clean piece in my injector and I'm going to install it and see what happens...
Thread
Thread Starter
Forum
Replies
Last Post
hunter05
2nd Generation S-series (1995-2005) Tech
35
May 16, 2024 09:01 PM
hunter05
Engine & Transmission
2
Mar 29, 2014 11:32 AM
coasterkid
2nd Generation S-series (1995-2005) Tech
1
Jan 27, 2010 12:42 PM
SlydinClyde
1st Generation S-series (1983-1994) Tech
5
Oct 20, 2009 12:56 AM
